Subscribe HERE
Test Protocol
This is a seating depth test with my 22 Creedmoor coyote rifle. This test is going to be dedicated to playing with seating depth. So, no other variables will be introduced. The testing is done at 100 yards and all of the components and equipment are listed below for reference.
Equipment
Rifle: Custom
Action: Mac Brothers EVO II
Chassis: MDT HNT26
Barrel: McGowen 22″ Sendero Stainless 1:8 Twist (threaded 5/8×24)
Chambering: 22 Creedmoor
Scope: CRONUS BTR GEN2 UHD 4.5-29×56 APRS6 FFP IR MIL
Rings: Warne Mountain Tech
Bipod: MDT CKYE Pod Double Pull
Muzzle Device: QD Silencerco 3-port 30cal Brake
Trigger: Triggertech Diamond 2 Stage Curved Shoe
Magazine: MDT 12 round 308 (without binder plate)
Disclaimer
WARNING: The loads shown are for informational purposes only. They are only safe in the system/platform shown and may not be safe in yours. Consult appropriate load manuals prior to developing your own handloads. Risencitizen.com and its authors, do not assume any responsibility, directly or indirectly for the safety of the readers attempting to follow any instructions or perform any of the tasks shown, or the use or misuse of any information contained herein, on this website.
Components
AMMO: Handloaded 22 Creedmoor
Brass: Alpha large rifle primer pocket 22 Creedmoor
Bullets: Berger 75gr VLD Target
Primer: Federal 210 Match large rifle
Powder: 42.5gr Vihtavuori N555
Seating Depth CBTO:
2.140″
2.100″
2.060″
2.020″
Disclaimer: These links may lead to or include affiliate links, which I make a commission from at no extra cost to you.
https://www.facebook.com/RisenCitizen
https://www.instagram.com/risencitizen
Amazon Link – https://amzn.to/357RZPS
Leave a Reply